Procedure: View Affected Circuits For A Specific Alarm; Figure 10-2 Selecting The Affected Circuits Option - Cisco 15454-TCC - Network Processor Card Operation Manual

Viewing ONS 15454 Alarms

Figure 10-2 Selecting the Affected Circuits option

Procedure: View Affected Circuits for a Specific Alarm

Step 1 Under the Alarm tab, right-click the Cond column of an active alarm.
The Select Affected Circuit dialog appears.
Step 2 Left-click Select Affected Circuits.
The Circuits screen appears with affected circuits highlighted
Cisco ONS 15454 Installation and Operations Guide
10-4
Chapter 10 Alarm Monitoring and Management
(Figure 10-3.)
November 2001