Creating Users And Setting Security; Table 3-1 Ons 15454 Security Levels-Node View - Cisco 15454-TCC - Network Processor Card Operation Manual

Creating Users and Setting Security

Saving the new configuration causes the TCC+ cards to reboot. During the reboot, a "Saving Changes -
TCC Reset" message displays on the LCD. The LCD returns to the normal alternating display after the
TCC+ reboot is complete.
3.4 Creating Users and Setting Security
The CISCO15 user provided with each ONS 15454 can be used to set up other ONS 15454 users. You
can add up to 500 users to one ONS 15454. Each ONS 15454 user can be assigned one of the following
security levels:
•
•
•
•
Table 3-1
Table 3-1 ONS 15454 Security Levels—Node View
CTC Tab Subtab
Alarms n/a
Conditions n/a
History Session
Node
Circuits n/a
Provisioning General
EtherBridge
Network
Protection
Ring
Security
SNMP
Sonet DCC
Timing
Cisco ONS 15454 Installation and Operations Guide
3-6
Retrieve users can retrieve and view CTC information but cannot set or modify parameters.
Maintenance users can access only the ONS 15454 maintenance options.
Provisioning users can access provisioning and maintenance options.
Superusers can perform all of the functions of the other security levels as well as set names,
passwords, and security levels for other users.
shows the actions that each user can perform in node view.
Actions
Synchronize alarms
Retrieve
Read only
Retrieve Alarms/Events
Create/Delete/Edit/ Upgrade
Path Selector Switching
Search
Switch retrieval
Edit
Spanning Trees: Edit
Thresholds: Create/Delete
All
Create/Delete/Edit
Browse groups
All (BLSR)
Create/Delete
Change password
Create/Delete/Edit
Browse trap destinations
Create/Delete
Edit
Retrieve Maintenance Provisioning
X X
X X
X X
X
X X
X X
X X
same user same user
X X
Chapter 3 Node Setup
Superuser
X X
X X
X X
X X
X X
X X
X X
X
X X
X X
X
X X
X X
X X
X
same user all users
X
X X
X
X X
November 2001