Hardware Installation - Cisco 15454-TCC - Network Processor Card Operation Manual

Hardware Installation

This chapter provides procedures for installing the Cisco ONS 15454. Chapter topics include:
Installation equipment
•
• Rack installation
Front door access
•
• Backplane covers
Fan-tray assembly
•
• Power and ground installation
Backplane pin connections (alarms, timing, LAN, and craft interface)
•
• Coaxial and DS-1 cable installation
Card installation
•
• Fiber-optic cable installation
Cable routing and management
•
• Ferrite installation
Hardware specifications
•
• Hardware and software compatibility
Note The Cisco ONS 15454 assembly is intended for use with telecommunications equipment only.
Only trained and qualified personnel should be allowed to install, replace, or service this
Warning
equipment.
This equipment must be installed and maintained by service personnel as defined by AS/NZS 3260.
Warning
Incorrectly connecting this equipment to a general purpose outlet could be hazardous. The
telecommunications lines must be disconnected 1) before unplugging the main power connector
and/or 2) while the housing is open.
November 2001
C H A P T E R
Cisco ONS 15454 Installation and Operations Guide
1
1-1