Alarm Profile Menus; Alarm Profile Editing; Table 10-5 Alarm Profile Buttons - Cisco 15454-TCC - Network Processor Card Operation Manual

Alarm Profiles
Profile names must be unique. If you try to import or name a profile that has the same name as another
profile, CTC adds a suffix to create a new name.
Click OK.
Step 9
A new alarm profile (named in Step 5) is created. This profile duplicates the severities of the default
profile and is added as a new column on the far right-hand side.
Modify (customize) the alarm profile:
Step 10
a.
b.
c.
d.
e.
f.
You can also clone alarm profiles shown under the Available tab.
Note

10.3.1.1 Alarm Profile Menus

The Alarm Profiles tab displays two menus on the right-hand side, Node/Profile Ops and Profile Misc,
which include six alarm profile buttons.

Table 10-5 Alarm Profile Buttons

Heading
Node Profile Ops
Profile Misc.

10.3.1.2 Alarm Profile Editing

Table 10-6
profile column.
Cisco ONS 15454 Installation and Operations Guide
10-10
In the new alarm profile column, click in a row that contains the alarm severity you want to change.
From the menu, select the desired severity.
Repeat Steps a and b for each alarm that needs to be changed.
After you have assigned the properties to your new alarm profile, click the new alarm profile to
highlight it and click the Store button.
In the Store Profile(s) dialog box, select a node or nodes where the profile will be stored and/or
specify a file on the workstation.
Click OK.
Button
Load
Store
Delete
Compare
Available
Usage
lists and describes the five profile editing options available when you right-click in an alarm
Chapter 10
Table 10-5 lists and describes each of the alarm profile buttons.
Description
Loads a profile to either a node or a file
Saves profiles on a node (or nodes) or in a file
Deletes profiles from a node
Displays differences between alarm profiles
(i.e. individual alarms that are not configured
equivalently between profiles)
Displays all of the profiles available on each
node
Displays all of the entities present in the
network and which profile(s) each is using
Alarm Monitoring and Management
November 2001