Figure 1-41 Attaching Ferrites To Amp Champ Connectors; Figure 1-42 Attaching Ferrites To Electrical Interface Adapters (Baluns) - Cisco 15454-TCC - Network Processor Card Operation Manual

Chapter 1 Hardware Installation
Ferrite Installation

Figure 1-41 Attaching ferrites to AMP Champ connectors

Figure 1-42 shows the suggested method for attaching ferrites to baluns. Use an oval ferrite TDK ZCAT
1730-0730 for each cable.

Figure 1-42 Attaching ferrites to electrical interface adapters (baluns)

B
A
Figure 1-43 shows the suggested method for attaching ferrites to SMB/BNC connectors. Use an oval
ferrite TDK ZCAT1730-0730 for each cable and place the ferrite as close to the connector as possible.
Cisco ONS 15454 Installation and Operations Guide
1-62
November 2001