Cisco 15454-TCC - Network Processor Card Operation Manual page 273

Chapter 7 Card Provisioning
Table 7-8
Heading
FC
UAS
PPJC-Pdet
NPJC-Pdet
PPJC-Pgen
NPJC-Pgen
PSC
November 2001
OC-N Card Threshold Settings on the Provisioning > Thresholds Tab (continued)
Description
Failure count
Unavailable seconds
Positive Pointer Justification
Count, STS Path detected. See the
"Pointer Justification Count
Parameters" section on page 8-12
for more information.
Negative Pointer Justification
Count, STS Path detected. See the
"Pointer Justification Count
Parameters" section on page 8-12
for more information.
Positive Pointer Justification
Count, STS Path generated. See
the "Pointer Justification Count
Parameters" section on page 8-12
for more information.
Negative Pointer Justification
Count, STS Path generated. See
the "Pointer Justification Count
Parameters" section on page 8-12
for more information.
Protection Switching Count (Line) Numeric. Defaults (15 min/1 day):
Options
Numeric. Defaults (15 min/1 day):
Line
• 10/0 (OC-3, Near and Far End)
10/40 (OC-12, OC-48, OC-192 Near and Far
•
End)
Path
10/10 (OC-12, OC-48, OC-192 Near and Far
•
End)
Numeric. Defaults (15 min/1 day):
Line
3/3 (OC-3, Near & Far End
•
3/10 (OC-12, OC-48, OC-192 Near and Far
•
End)
Path
10/10 (Near and Far End)
•
Numeric. Defaults (15 min/1 day):
Line
• 60/5760 Near End
• 0/0 Far End
Numeric. Defaults (Near and Far End):
Line
0 (15 minutes)
•
0 (1 day)
•
Numeric. Defaults (15 min/1 day):
Line
• 0/0 (Near and Far End)
Numeric. Defaults (15 min/1 day):
Line
0/0 (Near and Far End)
•
Line
• 1/5 (Near End)
• 0/0 (Far End)
Cisco ONS 15454 Installation and Operations Guide
Provisioning Optical Cards
7-21