Figure 3-2 Selecting The Ip Address Option; Figure 3-3 Changing The Ip Address; Figure 3-4 Selecting The Save Configuration Option; Figure 3-5 Saving And Rebooting The Tcc - Cisco 15454-TCC - Network Processor Card Operation Manual

Chapter 3 Node Setup
Figure 3-2
FAN FAIL
Press the Status button to display the node IP address
Step 3
default router IP address.
Figure 3-3
FAN FAIL
Push the Slot button to move to the IP address or subnet mask digit you need to change. The selected
Step 4
digit flashes.
Step 5 Press the Port button to cycle the IP address or subnet mask digit to the correct digit.
When the change is complete, press the Status button to return to the Node menu.
Step 6
Repeatedly press the Port button until the Save Configuration option appears
Step 7
Figure 3-4
FAN FAIL
Step 8 Press the Status button to select the Save Configuration option.
A Save and REBOOT message appears
Figure 3-5
FAN FAIL
Press the Slot button to save the new IP address configuration. (Or press Port to cancel the
Step 9
configuration.)
November 2001
Selecting the IP address option
Slot Status Port
CRIT MAJ MIN
Changing the IP address
Slot Status
CRIT MAJ
Selecting the Save Configuration option
Slot Status
CRIT MAJ
Saving and rebooting the TCC+
Slot Status
CRIT MAJ
Slot-0
Status=IpAddress
(Figure
Port
172.020.214.107
<Next Done
MIN
Port
Slot-0
Status=Save Cfg.
MIN
(Figure 3-5).
Port
Save and REBOOT?
<Apply
MIN
Cisco ONS 15454 Installation and Operations Guide
Setting Up Network Information
3-3), the node subnet mask length, or
Mod>
(Figure 3-4).
Revert>
3-5