Table of Contents
Advertisement
Provisioning Electrical Cards
Depending on the setting you need to modify, click the Line, Line Thrshld, Elect Path, or Sonet
Step 3
Thrshld subtab.
Note
Modify the settings shown in
Step 4
For numerics, double-click the field and type the new number.
Table 7-2
Subtab
Line
Line
Thrshold
Cisco ONS 15454 Installation and Operations Guide
7-4
See
Chapter 10, "Alarm Monitoring and Management"
Behavior tab.
Table 7-2 on page
DS-1 Card Parameters
Parameter
Description
Port #
Port number
Port
Port name
Line Type
Defines the line framing type
Line
Defines the DS-1 transmission
Coding
coding type
Line
Defines the distance (in feet)
Length
from backplane connection to
the next termination point
Status
Places port in or out of service
CV
Coding violations
ES
Errored seconds
SES
Severely errored seconds
for information about the Alarm
7-4. For drop-down lists, select an item from the list.
Options
1 - 14
To enter a name for the port, click the
cell and type the name. To change a
name, double-click the cell, then edit
the text.
•
D4 (default)
ESF - Extended Super Frame
•
Unframed
•
AMI - Alternate Mark Inversion
•
(default)
B8ZS - Bipolar 8 Zero Substitution
•
•
0 - 131 (default)
•
132 - 262
•
263 - 393
•
394 - 524
•
525 - 655
Out of Service (default)
•
In Service
•
Numeric. Defaults:
13340 (15 min)
•
•
133400 (1 day)
Numeric. Defaults:
•
65 (15 min)
648 (1 day)
•
Numeric. Defaults:
10 (15 minutes)
•
100 (1 day)
•
Chapter 7
Card Provisioning
November 2001
Advertisement
Table of Contents
