Scenario 2: Ctc And Ons 15454S Connected To Router; Figure 4-1 Scenario 1: Ctc And Ons 15454S On Same Subnet - Cisco 15454-TCC - Network Processor Card Operation Manual

Operation guide
Hide thumbs Also See for 15454-TCC - Network Processor Card:
Table of Contents

Advertisement

Chapter 4
IP Networking
Figure 4-1
IP Address 192.168.1.10
Subnet Mask 255.255.255.0

4.2.2 Scenario 2: CTC and ONS 15454s Connected to Router

In Scenario 2 the CTC computer resides on a subnet (192.168.1.0) and attaches to LAN A
The ONS 15454s reside on a different subnet (192.168.2.0) and attach to LAN B. A router connects LAN
A to LAN B. The IP address of router interface A is set to LAN A (192.168.1.1), and the IP address of
router interface B is set to LAN B (192.168.2.1).
On the CTC computer, the default gateway is set to router interface A. If the LAN uses DHCP (Dynamic
Host Configuration Protocol), the default gateway and IP address are assigned automatically. In the
Figure 4-2
November 2001
Scenario 1: CTC and ONS 15454s on same subnet
CTC Workstation
IP Address 192.168.1.100
Subnet Mask 255.255.255.0
Default Gateway = N/A
Host Routes = N/A
ONS 15454 #1
Default Router = N/A
Static Routes = N/A
example, a DHCP server is not available.
ONS 15454 #2
IP Address 192.168.1.20
Subnet Mask 255.255.255.0
Default Router = N/A
Static Routes = N/A
SONET RING
Cisco ONS 15454 Installation and Operations Guide
ONS 15454 IP Addressing Scenarios
LAN A
ONS 15454 #3
IP Address 192.168.1.30
Subnet Mask 255.255.255.0
Default Router = N/A
Static Routes = N/A
(Figure
4-3
4-2).

Advertisement

Table of Contents
loading

Table of Contents