Configuring VirusScan for NetApp 7.1.0
Use different settings for low-risk processes
Before you can define low-risk processes, you must specify that you want to use
different settings for low-risk and high-risk processes:
1
1
2
3
4
®
24
VirusScan
for NetApp
In the upper details pane under
.
Processes Policies
In the lower details pane, select the
Figure 1-11. Default Processes Policies — Processes tab
Deselect
.
Inherit
Select
Use different settings for high-risk and low-risk processes
Click
to save these settings.
Apply
®
software version 7.1.0
VirusScan for NetApp 7.1
tab.
Processes
, select
Default
.