Sending Still Pictures; Sending Still Pictures Continuously; Sending One Still Picture; Ending A Meeting - Sony PCS-1500 Service Manual

Sending Still Pictures

When you send pictures that contain lots of text, we
recommend you to send that picture as a still picture. Since still
pictures are more clear than moving pictures for reading text.
You can send a video as a still picture of external equipment
connected to the the Compact Processor, or of the camera.
You can also send pictures continuously.
Note
You cannot send still pictures when VIDEO MODE is set to
H.263 CIF 15 fps or H.263 CIF 30 fps.

Sending Still Pictures Continuously

1
Press the PIX SHOT AUTO button on the Remote
Commander.
The moving picture on the monitor screen is frozen, and
the indication appears on the monitor screen.
When the local picture is displayed, the still picture is sent.
To cancel sending still pictures
Press the PIX SHOT AUTO or SNAP button on the Remote
Commander.
Note
The interval time between still pictures depends on the transfer
rate.

Sending One Still Picture

1
Press the PIX SHOT SNAP button on the Remote
Commander.
The moving picture on the monitor screen is frozen, and
the indication appears on the monitor screen.
When the local picture is displayed, the still picture is sent.
50
Chapter 2 Basic Operation During a Meeting

Ending a Meeting

Press the DISCONNECT ( ) button on the Remote
Commander.
The following indication appears on the monitor screen.
DISCONNECT
Are You Sure ?
YES: NO: CANCEL
To disconnect the call
Press the DISCONNECT ( ) button on the Remote
Commander again.
Note
The Compact Processor remains on even if the connection is
broken.
To continue your meeting
Press the CANCEL button on the Remote Commander.
Chapter 2 Basic Operation During a Meeting
51