Cisco CTS-500 Configuration Manual page 35

Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Table 1-4 Product Specific Configuration Layout (continued)
Field
Advertise G.722 Codec
Table Microphone Count
(CTS 1100, CTS 1300)
External SYSLOG Address —
Alternate
Cisco Unified CM for
Directory Lookup
Cisco TelePresence
Recording Server Address
Maximum Self View Time
(in seconds)
Check Boxes
Enable Audio Echo
Cancellation (AEC)
Enable Call Termination
Ring
Optional Hardware
Presentation Codec
OL-21851-01
Required? Description
Yes Wideband Codec. Indicates whether Cisco Telepresence endpoints will advertise
the G.722 audio codec to Cisco Unified CM. When enabled, preference is given to
this audio codec.
Choices are:
Use System Default (default)—This CTS will defer to the setting specified in
•
the enterprise parameter, Advertise G.722 Codec
• Disabled—This CTS will not advertise G.722 to Cisco Unified CM
• Enabled—This CTS will advertise G.722 to Cisco Unified CM
See the Configuring Wideband Codec
Administration Guide for Cisco Unified Communications Manager 6.1(3) (SCCP)
for more information about the G.722 codec.
Yes Number of microphones that are available. Select a number from the drop-down
menu.
Note See the "Setting Up the Microphones" section of the
System 1300 Assembly, First-Time Setup, and Field-Replaceable Unit Guide
for more information.
Configures the external syslog address. Allowed values: Syslog address format can
be either:
• host
or
• host:port
Host is either a hostname or IP address (up to 60 characters long). Port is a number
between 0 and 65535. Default is 514.
— Configures the alternate Cisco Unified CM IP address that the CTS should query in
the directory. Maximum length: 64.
Note Cisco Unified CM Release 7.x and later releases only.
— Configures the address (IP address or DNS name) of the Cisco TelePresence
Recording Server (CTRS). Maximum length: 64.
— Leave the default setting.
Camera loopback is always in self view or flipped mode.
Note
See the "Self View Control" section on page 5-5
Self View feature.
Yes Check this box to enable audio echo cancellation in the CTS. Default is True.
Yes Check this box to enable the a ring tone at the termination of a call. Default is True.
— Box is un-checked by default.
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Configuring a Cisco TelePresence Device
section of the Cisco Unified IP Phone 7931G
Cisco TelePresence
for information about using the
1-15