Cisco CTS-500 Configuration Manual page 16

Contents
Cisco TelePresence Bandwidth Requirements
For information about Cisco TelePresence service level requirements including bandwidth, latency
(delay), jitter (variations in delay), and packet loss, see the
Design Guide
Device and Cluster Security Modes
The Media is Encrypted icon (closed lock) is displayed on the screen only when the Device Security
mode is set to encrypted and cluster security mode is set to 1
system, check the following settings:
•
•
Supported Cisco Unified CM Characters and Digits
Use the information in
are used to configure and maintain the Cisco TelePresence system.
Table i-1 Supported CTS Characters and Digits
Character or Digit
• Digits 0 through 9
• * (Asterisk)
• # (Number sign or hash)
• + (Plus sign, escape
symbol)
Note Cisco Unified CM
no longer supports
the '$' (currency
symbol) in system
passwords.
Cisco Unified CM Administration Status Indicators, Icons, and Buttons
Table i-2
configuration.
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
vi
on Cisco.com.
Device Security Mode should be set to Encrypted in the SIP Phone Security Profile Information
field. See the "SIP Phone Security Profile Information" section on page 27
information.
Cluster Security Mode field is set to 1
in Cisco Unified CM Administration > System > Enterprise Parameters. To configure and verify
cluster security mode, see the
section of the Cisco TelePresence Security Solutions
Table i-1
Description
The number that you want the system to dial
when the user presses the speed-dial button.
Note The speed-dial function does not
allow you to configure pauses or
waits.
describes Cisco Unified CM Administration interface icons that help you manage your system
(mixed mode) in the Configuration Settings for CTL Client
Verifying the Cisco Unified Communications Manager Security Mode
Guide.
as a guide for supported Cisco Unified CM characters and digits that
Where Used
• Speed Dial and Abbreviated Dial
Configuration window, Number field.
See
Directory.".
Multilevel precedence and preemption
•
MLPP Alternate Party
(Destination) field.
See
Communications Manager for the
Cisco TelePresence System."
Cisco TelePresence Network Systems 2.0
(mixed mode). While configuring your
for configuration
Chapter 5, "Managing the Speed-Dial
Settings, Target
Chapter 1, "Configuring Cisco Unified
Preface
OL-21851-01