Certification Authority Proxy Function (Capf) Information - Cisco CTS-500 Configuration Manual

Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Table 1-2 Cisco TelePresence Protocol-Specific Information (continued)
Field
Check-Boxes
Media Termination point
Required
Unattended Port
When you are finished making changes, click Save to save your settings.
Note

Certification Authority Proxy Function (CAPF) Information

This option will not be visible unless you have enabled CAPF on the Cisco Unified Communications
Note
Manager service parameter.

The Security Profile contains additional CAPF settings.
Enter settings for CAPF using the information in
Table 1-3
Field
Certificate Operation
Authentication Mode
Authentication String
Key Size (Bits)
Operation Completes By
Certificate Operation Status
Note When you are finished making changes, click Save to save your settings.
OL-21851-01
Required? Setting
— Box is un-checked.
— Box is un-checked.
Cisco TelePresence CAPF Information
Required? Setting
Yes No Pending Operation
Yes Leave this field unchanged.
— Leave this field unchanged.
Yes Leave this field unchanged.
— Leave this field unchanged.
— <None>
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Configuring a Cisco TelePresence Device
Table 1-3 as a guide. Click Save to save your settings.
1-9