Cisco CTS-500 Configuration Manual page 17

Preface
Table i-2 Cisco Unified CM Administration Icons
Icon Description
Orange Question
Mark
Information
Button
Error Button
Save
Apply Config

Apply Config to
Selected
Delete
Copy
OL-21851-01
Where Found
Online Help. Found at the top of the
on the Phone Configuration page.
When further task descriptions are desired, click this icon to open online help at any
time while performing configuration tasks within the
Layout window.
See also Appendix C "Product Specific Configuration Layout Help."
A non-selectable button found throughout Cisco Unified CM Administration
interface pages. Important notes about configuration tasks are described; asterisks
(*) that are found in configuration text are explained here. Also indicates system
status.
A non-selectable button that appears on the Phone Configuration page when an error
has occurred. Important notes about the error are displayed with the icon.
Click the Save icon to save configuration changes. A dialog box opens: "Click on the
Apply Config button to have the changes take affect." You must first click the Apply
Config icon or on the Apply Config button before you can save your configuration.
Click the Apply Config icon to apply changes to your configuration on the specified
device before clicking the Save icon. The Apply Config window for that device
opens:
Note Please save the configuration before continuing. When you click Apply
Config, the device may go through a restart. When restart is initiated,
connected calls will be preserved but calls in progress may be dropped.
Click OK or Cancel to complete the action.
Deletes a specified phone. A dialog box opens: "You are about to delete this phone.
This action cannot be undone. Continue?"
Click OK or Cancel to complete the action.
Takes a snapshot of all of your settings on the Phone Configuration page, which is
displayed in a new window.
Click the Save icon or the Save button to complete the action.
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Product Specific Configuration Layout
Product Specific Configuration
Contents
window
vii