Configuring Microsoft Exchange For Cts Manager; Downloading A Microsoft Exchange Certificate - Cisco CTS-500 Configuration Manual

Configuration guide for the cisco telepresence system
Table of Contents

Advertisement

Configuring Microsoft Messaging Software for Cisco TelePresence Manager
Table 6-1
Pre-Installation Guidelines for Setting up Initial System Network for CTS-Manager
Setup Guidelines before Installing
CTS-Manager
1.
Configure Microsoft Exchange
Or
Configure IBM Domino
2.
Configure Cisco Unified CM
3.
Install and run PreQualification
Assistant

Configuring Microsoft Exchange for CTS Manager

This section contains the following tasks:

Downloading a Microsoft Exchange Certificate

If you are using secure mode, a certificate request must exist. If a certificate was not requested when
Microsoft Exchange was installed, you can follow the procedure described in the tutorial found on the
Microsoft Exchange site, MSExchange.org. Follow the instructions in the "Installing the Microsoft
Certificate Service" and "Creating the Certificate Request" sections then complete the following steps:
Make a copy of the Microsoft Exchange certificate and place it in a folder that is accessible to the
Step 1
computer that has browser access to the Cisco TelePresence Manager server.
Request a certificate for the Active Directory. The certificate file is named _.crt by default. An enterprise
Step 2
certificate authority (CA) automatically publishes the root certificates, and enterprise domain controllers
automatically enroll for all domain controller certificates.
Step 3
Verify the following:
a.
b.
c.
Step 4
Choose Download CA Certificate using Distinguished Encoding Rules and the encoding method.
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
6-4
Description
How to configure Microsoft Exchange and
Active Directory for the CTS-Manager
system.
How to configure IBM Domino and Domino
server for the CTS-Manager system.
Verify that Cisco Unified CM is configured
for the CTS-Manager system.
Install and run the PreQualification Assistant
to ensure that your pre-installation setup is
configured correctly.
Downloading a Microsoft Exchange Certificate, page 6-4
Deploying Microsoft Exchange 2003, page 6-5
Deploying Microsoft Exchange 2007 and 2010 EWS, page 6-5
Using Internet Explorer, connect to the following:
https://<CA server>/certsrv
Make sure the certificate, the CA, and the CA web interface are all installed on the same server.
Authenticate as the administrator, making sure that you specify the proper domain (for example,
demotest\administrator).
Chapter 6
Setting Up the Room to Use Cisco TelePresence Manager
Location
Configuring Microsoft Messaging
Software for Cisco TelePresence
Manager, page
Configuring IBM Domino for
CTS-Manager, page
Configuring Cisco Unified CM for
Cisco TelePresence Manager,
page
6-13.
Testing Cisco Unified CM with the
Pre-Qualification Assistant, page
6-2.
6-12.
6-20.
OL-21851-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Unified communications manager

Table of Contents