Cisco CTS-500 Configuration Manual page 137

Appendix A MIBs, RFCs, and SNMP Trap Messages for the Cisco TelePresence System
Table A-3 Peripheral Status (continued)
Notification
ctpDVIPeripheralStatus—
Information about a single peripheral
attached through a DVI port.
OL-21851-01
Return Values
Cable
• plugged (1)—Peripheral cable is plugged.
• loose (2)—Peripheral cable is loose.
• unplugged (3)—Peripheral cable is unplugged.
• unknown (4)—Cannot detect peripheral cable status.
internalError(5)—Internal error.
•
Power
• on (1)—Peripheral power is on.
standby (2)—Peripheral power is in standby mode.
•
• off (3)—Peripheral power is off.
• unknown (4)—Cannot detect peripheral power status.
• internalError (5)—Internal error.
Example
CISCO-TELEPRESENCE-MIB::ctpDVIPeripheralCableStatus.9.1 = INTEGER:
plugged(1)
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Peripheral Status Messages
A-7