Cisco CTS-500 Configuration Manual page 100

Managing the Speed-Dial Directory
b. Reset—Opens the Device Reset window where you can reset or restart the device.
Click the Reset or the Restart icon or the Resest or Restart buttons to complete the action. To return
to the previous window without resetting or restarting the device, click Close.
Note
Apply Config—Required to save the configuration.
c.
d. Device—The Device Configuration window appears where you can view and modify the following:
–
–
–
–
e. Line Settings—The Line Settings Configuration window appears where you can view and modify
the Line Information and Incoming Call Forwarding settings. View or edit the fields and choose
Save, Device, or Speed Dials to complete the action.
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
4-6
A device must be registered with Cisco Unified Communications Manager in order to reset or
restart it. 

Resetting a gateway/trunk/media devices drops any calls in progress that are using that
gateway/trunk/media device. Restarting a gateway/media device tries to preserve the calls in
progress that are using that gateway/media device, if possible. Other devices wait until calls are
complete before restarting or resetting. Resetting or restarting an H323 device does not
physically reset or restart the hardware; it only reinitializes the configuration loaded by
Cisco Unified Communications Manager.
Device Name (choose a device from the drop-down menu)
Device Model (view only)
Device Description (view only)
User Locale: Leave as <None> (additional choices are English, United States and Nihongo,
Japanese)
Chapter 4 Managing Cisco Unified IP Phone Features
OL-21851-01