Creating An Application User For Cts Manager - Cisco CTS-500 Configuration Manual

Chapter 6 Setting Up the Room to Use Cisco TelePresence Manager
Downloading a Cisco Unified Communications Manager Certificate
For deployments using Microsoft Exchange, IBM Domino, or
Cisco Unified Communications Manager certificate must be accessible for CTS-Manager to
communicate with Cisco Unified CM.
Note Only one certificate can be used and it cannot be reused or renamed. Expired certificates cannot be
uploaded.
To obtain a Cisco Unified Communications Manager certificate, follow these steps:
Step 1 Log into the Cisco Unified CM Administration interface.
From the Navigation menu, select Cisco Unified OS Administration and click Go.
Step 2
From the Security menu click Certificate Management.
Step 3
Click the link for tomcat.der.
Step 4
In the Certificate Configuration window, click the Download button. This saves a copy of the certificate
Step 5
to your computer. Make sure that this file is accessible to the computer that has browser access to the
Cisco TelePresence Manager server.
Deleting a Cisco Unified CM from your network does not delete the corresponding CTS-Trust
Note
certificate; it remains in the system. If you add back to your network a deleted Cisco Unified CM, you
will not need to upload the trust certificate again; an "existing file" error will be detected.
Step 6 Proceed to

Creating an Application User for CTS Manager

Create an application user for CTS Manager by following these steps:
Log into the Cisco Unified CM Administration interface.
Step 1
From the User Management drop-down menu select Application User. The Find and List Application
Step 2
Users window appears.
Click Add New. The Application User Configuration window appears.
Step 3
Enter your user name and password. Verify your password.
Step 4
Assign all Cisco TelePresence endpoints and Cisco Unified IP phones to the application user profile (see
Step 5
Adding CTS Endpoints and Cisco Unified IP Phone
Navigate to Device > Phone and add the MAC address of each CTS device and shared Cisco Unified IP
Step 6
phones to the application user profile.
Create a user group in the Cisco Unified CM for Cisco TelePresence Manager by completing these steps:
Step 7
a.
b.
OL-21851-01
Creating an Application User for CTS
Choose User Management > User Group. The Find and List User Groups window appears.
Click Add New. The User Group Configuration window appears.
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Configuring Cisco Unified CM for Cisco TelePresence Manager
Scheduling API, a
Manager.
Devices.)
6-15