Protocol Specific Information; Certification Authority Proxy Function (Capf) Information - Cisco CTS-500 Configuration Manual

Chapter 2 Configuring the Cisco Unified IP Phone for MIDlets

Protocol Specific Information

Link the Cisco TelePresence device to Cisco Unified Communications Manager phone profiles for the
presence group and security-related SIP phone settings using the information in
Table 2-2
Field
Packet Capture Mode
Packet Capture Duration
Presence Group
SIP Dial Rules
MTP Preferred Originating Codec
Device Security Profile
Rerouting Calling Search Space
SUBSCRIBE Calling Search Space —
SIP Profile
Digest User
Check-Boxes
Media Termination point Required
Unattended Port
Require DTMF Reception
Note

Certification Authority Proxy Function (CAPF) Information

Table 2-3
section on the Phone Configuration page. Leave all fields unchanged.
Table 2-3
Field
Certificate Operation
Authentication Mode
Authentication String
Key Size (Bits)
Operation Completes By
Certificate Operation Status
Note
OL-21851-01
Cisco Unified IP Phone 7975 Protocol-Specific Information
When you are finished making changes, click Save to save your settings.
describes fields found in the Certification Authority Proxy Function (CAPF) Information
CAPF Settings
Security Profile Contains Additional CAPF Settings. See the
Information" section on page
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Required? Setting
Yes <None>
— 0
Yes Standard Presence group.
— <None>
Yes 711ulaw
Yes Non Secure SIP Profile auth by null String.
For more information about configuring
Note
Cisco Unified CM security features, refer
to the
Manager Security Guide, Release
— <None>
<None>
Yes Standard SIP Profile.
— <None>
— Box is un-checked.
Required? Setting
Yes No Pending Operation.
Yes Leave this field unchanged.
—
Yes
Optional
— <None>
1-29.
Configuring the Cisco Unified IP Phone
Table 2-2 as a guide.
Cisco Unified Communications
"Phone Security Profile CAPF
7.1(2).
2-7