Line X On Device X - Cisco CTS-500 Configuration Manual

Assigning a Directory Number to the Cisco TelePresence Device

Line X on Device X

The fields described in
Table 1-21
Field
Display (Internal Caller ID) —
ASCII Display (Internal
Caller ID)
External Phone Number
Mask
Visual Message Waiting
Indicator Policy
Audible Message Waiting
Indicator Policy
Ring Setting (Phone Idle)
Ring Setting (Phone
Active)
Call Pickup Group Audio
Alert Setting (Phone Idle)
Recording Option
Recording Profile
Monitoring Calling Search
Space
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
1-36
Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
Table 1-21 are left unchanged in the Line X on Devices X Settings box:
Cisco TelePresence Device Line X on Devices X Settings
Required?
—
—
Yes
Yes
Yes
—
—
Yes
—
—
Setting
Leave the default setting.
Display text for a line appearance is intended for
Note
displaying text such as a name instead of a directory
number for internal calls. If you specify a number,
the person receiving a call may not see the proper
identity of the caller.
Leave the default setting.
Leave the default setting.
Leave the default setting.
Leave the default setting.
Leave the default setting.
Leave the default setting. Applies to this line when any line
on the phone has a call in progress.
Leave the default setting.
Leave the default setting.
<None>
<None>
OL-21851-01