Cisco CTS-500 Configuration Manual page 32

Configuring a Cisco TelePresence Device
Table 1-4
Table 1-4 Product Specific Configuration Layout
Field
Cisco TelePresence Type
Admin. Web Access
Room Name (from
Exchange(R))
Maximum Call Duration
(in minutes)
Quality (per Display)
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
1-12
Chapter 1 Configuring Cisco Unified Communications Manager for the Cisco TelePresence System
contains descriptions of the Product Specific Configuration Layout information fields.
Required? Description
Yes Indicates the type of Cisco TelePresence system you have installed.
Yes When enabled, allows access to the Cisco TelePresence Web Administration
interface.
Default is Enabled
— Conference room name as described in Microsoft Exchange. Used to schedule
conference calls. This field accepts a text string with a maximum of 64 characters.
If you have the
Note
conference room is required. The name must exactly match the room name
(including domain name) as it is entered in the Microsoft Exchange
database. It will be used to schedule conference calls.
Yes Maximum duration (in minutes) allowed for a Cisco TelePresence conference call.
• Minimum is 0
Maximum is 10080 (7 days).
•
Default is 0 (no call duration set). The default setting disables this feature.
•
This feature is coordinated with the Maximum Call Duration Timer in the
Note
Cisco Unified Communications Manager service parameters. If values other
than 0 are entered for either of these fields, the smaller value takes
precedence.
Yes Bandwidth used by the system. Higher bandwidth increases video quality, but may
also cause packets to be dropped and video to be interrupted.
Choices are:
• Highest Detail, Best Motion: 1080p (default)
• Highest Detail, Better Motion: 1080p
• Highest Detail, Good Motion: 1080p
High Detail, Best Motion: 720p
•
High Detail, Better Motion: 720p
•
High Detail, Good Motion: 720p
•
High Detail, Limited Motion: 720p (Lite)
•
Network friendly for personal systems: 480p
•
The audio addin conf softkey is not available on the Cisco Unified IP
Note
Phone when using the 720p (Lite) feature.

You must have
(Lite) feature.
For more information about 720p (Lite), see
Cisco TelePresence Manager
MIDlets installed on the Cisco Unified CM to use the 720p
Quality Per Display - 720p
application, the name of the
(Lite).
OL-21851-01