Table of Contents
Advertisement
Configuring the Cisco Unified IP Phone
Device Information
Enter the settings to configure the Cisco Unified IP Phone 7975 using the information in
guide.
Assign the same directory number that is assigned to the Cisco TelePresence device to the
Note
Cisco Unified IP Phone 7975.
Table 2-1
Field
Registration
IP Address
Active Load ID
Device is active
Device is trusted
MAC Address
Description
Device Pool
Common Device Configuration
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
2-4
Cisco Unified IP Phone 7975 Device Information
Required?
—
—
—
—
—
Yes
—
Yes
—
Chapter 2
Configuring the Cisco Unified IP Phone for MIDlets
Setting
Read-only. Indicates whether the system is
Registered with Cisco Unified Communications
Manager and lists the registered Cisco Unified CM
address.
Cisco Unified IP Phone IP Address. Click on the
address to see information for that phone in a new
window.
View-only field showing the status of the active
load.
Available on the Cisco Unified IP Phone but
Note
not available on the CTS.
A green check mark indicates that the device is
active.
A green check mark indicates that the device is
trusted.
MAC address for the Cisco Unified IP Phone 7975.
Short description of the device.
Your device pools. Leave field as Default.
Click View Details to open the Device Details
window, which includes the following system
setting information:
•
Device Pool Settings
Roaming Sensitive Settings
•
Device Mobility Related Information
•
Incoming Calling Party Settings
•
Your configured devices. Leave field as <None>.
Click Details or View to see the following
information in a new window:
Common Device Configuration Information
•
•
Multilevel Precedence and Preemption
Information
Table 2-1
as a
OL-21851-01
Advertisement
Chapters
Table of Contents
