8.1
Communication Parameters
The 6030/6050 Wide Format Printer and Copier/Printer must be connected to a host PC
before printing can be performed. Once the Printer or Copier/Printer is connected to the
network, the communication parameters must be set up. The communication parameters
can be set up from either the printer control panel or from Print Services on Web. This
section explains how to use both methods to perform the setup procedures. Explained,
too, is the procedure for printing a list of the communication parameters.
Communication Parameters Definitions
Communication parameters may be defined for the following.
•
TCP/IP
•
Serial
•
Centronics (optional)
•
VPI (optional)
•
SNMP
SNMP can only be set up from Print Services on Web.