Interruption Copying - Xerox 6030 User Manual

2.3

Interruption Copying

It is possible to interrupt large copying jobs when a high priority copy must be made.
The settings for the interrupted job are retained until the interruption job is finished.
Procedure
1
2
3
4
5
• The following are not possible during interruption copying.
•Interruptions by other copying jobs.
•<Custom Presets/Meter Check> key operations.
•Sorted output and multi-jobs.
Press the <Interrupt> key on the control panel.
The [Interrupt] lamp will illuminate and the job that is in process will be
suspended.
An "interruption reservation status" goes into effect if the interruption job
cannot be processed immediately.
Make the required copy settings (R/E, background suppression, image density,
etc.) for the new copy job.
Enter the copy quantity (1 to 99) on the keypad.
Insert the document in the scanner face down, with the edge aligned with the
document insertion guide. The document will scan.
When the interruption job is finished, press the <Interrupt> key again.
The interruption mode will be cancelled and processing of the suspended job
will resume.
If you forget to cancel the interruption mode, it will be canceled automatically
after a preset period elapses during which no copies are made.