System Parameter Setup (Printer Control Panel) - Xerox 6030 User Manual

8.4
System Parameter Setup
(Printer Control Panel)
The following system parameters can be set up from the printer control panel.
Set Date
AUTO ROLL
SPA PAPER WIDTH Sets the paper width for SP. JIS/ISO A paper. The default
Smoothing
Low power mode1
Low power mode2
Sleep Mode
Attention Light
Buzzer
These parameters can be set up on the copier control panel on the Xerox 6030/6050
Copier/Printers. If the parameters are set up on both the printer control panel and the
copier control panel, the most recent settings will take precedence.
• Refer to "7.2 Printer Control Panel Usage" for detailed instructions on printer
control panel operations.
Menu Item
Sets up the internal clock. The parameters are set in the order
year, month, day, hour, and minutes.
Determines whether the automatic paper switching function
from the roll to the tray and tray to the roll is [ ON ] or [ OFF ].
The default setting is [OFF].
value is [SP A1].
[SP. A1]
[SP. A2]
Determines whether 1200 dpi smoothing will be [ ON ] or
[ OFF ]. The default setting is [OFF].
Sets the time (1 to 120 minutes) that must elapse following a
copy or print job before the machine enters the Low power
mode 1. Low power mode 1 reduces the temperature of the
fuser, decreasing power consumption.
The default setting is [5] minutes.
Sets the time (5 to 120 minutes) that must elapse following a
copy or print job before the machine enters low power mode
2. Low power mode 2 reduces the fuser temperature more
than low power mode 1.
The default setting is [15] minutes.
Sets the sleep mode to [ ON ] or [ OFF ] and sets the time (15
to 120 minutes) that must elapse after the previous copy or
print job until the machine enters the sleep mode. The sleep
mode switches off the power of the printer.
The default setting is [90] minutes.
Not Available
Not Available
Description
620 or 625mm
435 or 440mm