Centronics (optional) Setup
PORT SETTING
CENTRO
CENTRO
DMA Timeout
DMA Timeout
005 sec
1
Display [CENTRO] on the setup item selection
screen, and then press the <
2
Select the item that is to be set up with the use of
the < > and < > keys, and then press the
<
[Ack Mode], [DMA Timeout], [EOP Timeout],
and [Job Separation] will display, in that order.
3
Select the parameters with the use of the < >
*
and < > keys, and then press the <Set> key.
An asterisk [*] will display on the right side of
the parameters once they have been set.
> key.
> key.