Xerox 6030 User Manual page 40

No. Name
1 Menu Screen or (Setup Screen) Used to set up copy jobs, map original sizes to the media,
2 [Job in Memory] lamp
3 Screen Contrast Dial
4 <Custom Presets/Meter
Check> key
5 <Power Saver> key
6 Keypad (0 to 9, C)
7 <Menu> key
8 <Stored Job> key
9 <Copy From Memory> key
10 <Clear All> key
11 <Interrupt> key
12 <Stop Copy> key
13 <Stop Document> key
14 <Low Speed Scanning> key
15 <Start> key
16 <Sample Copy> key
17 <Media Cut Mode> keys
display messages and procedures, and provide troubleshooting
help, e.g., for jam clearance.
Illuminates for a preset period while the previous copy job is
retained in memory. Enables the user to reprint the previous
copy job without rescanning the original(s).
Adjusts the contrast of the touch screen.
Provides access to the machine's default settings. Also
enables the user to view the billing meters, software versions,
machine configuration, etc.
Switches the machine into and out of the low power mode.
Enables the user to enter the copy quantity and setting values.
Pressing the <C> key clears all entered values.
Currently not supported.
Saves copy job settings in memory so they can be recalled and
the stored jobs run again.
Reprints the most recent copy job. The lamp illuminates when
copies are printed from memory.
Cancels the current job settings and returns them to the default
values.
Enables the user to interrupt a copy job to perform a higher
priority job. The lamp on the left side illuminates during
interruption copying.
Ejects all copies currently in process and stops the machine.
Immediately stops document feed.
Used to prevent damage to fragile originals. Press this key to
enter the low-speed scan mode. The lamp on the left side will
illuminate during low-speed scanning.
Starts document scanning when the scanner is set to the
manual start mode, when copying from memory, and when
making sample copies.
Enables the user to try out different copy settings to determine
which provide the best copy quality. The lamp on the left side
illuminates during sample copying.
Selects the method for cutting media. The lamp on the left side
of the selected cut mode will illuminate.
Function