Xerox 6030 User Manual page 198

Size Mapping
Size mapping is the process of setting up a table that establishes relationships
between input document sizes and output image sizes. When size mapping is
finished (must be done prior to printing), documents can be enlarged or reduced
automatically based on the table entries.
Input document size
Media Mapping/Automatic Mapping
Media mapping is the process of setting up a table that establishes relationships
between output image sizes and media sizes. This process, like size mapping,
must be performed prior to printing. Once the media mapping table is finished,
the media size is determined by the entries in the media mapping table.
When Automatic Mapping is selected, the output media size that matches the
output image size will be selected.
Output document size
Enlarge
A2
Reduce
Refer to " Size/Media Mapping" in "9.3 Logical Printer Print Settings" for more
details.
Check media mapping to be sure the media size selected matches the media loaded in the
printer. Refer to "9.3 Logical Printer Print Settings" for more details.
A3
Rotated 90 degrees
A1
A3
Output image size
A3
Output on A3 roll media
Paper
Output on A2 roll media
A3