Making Copies In The Auto Mode - Xerox 6030 User Manual

3.2

Making Copies in the Auto Mode

The auto-mode allows you to automatically reduce or enlarge an original based
on the entries in the media mapping table. The media mapping table is a matrix
that specifies which media size will be selected when a standard size original is
copied. For example, a media mapping table may specify that ARCH D originals
will be copied on ARCH B media. In this case, the ARCH D original will be
reduced and printed automatically on ARCH B media, without the user having to
enter a reduction percentage. The media mapping table is created using the
custom presets.
Media Size Restrictions in the Auto Mode
The following restrictions apply to making copies in the auto mode. These
restrictions are based on the media cut mode that is specified for various media
sizes.
Media
Series
ANSI
series
ARCH
series
ISOA
series
• The [Media Supply], [Normal R/E], and [R/E by L&W] settings are invalid when
the auto mode is selected.
• The [Media Cut Mode] and [Variable Length] settings cannot be used in
combination when in the auto mode.
• Refer to "Media Type for Auto Mode" in "5.3 Setting up the Copy Features" for
details on the custom presets.
• Refer to "1.14 Cutting Roll Media" for details on the media cut mode.
Media Cut
Portrait
Landscape
Synchronized
Portrait
Landscape
Synchronized
Portrait
Landscape
Synchronized
Restrictions
No restrictions.
Document size: E cannot be selected.
Media size: E cannot be set up.
Media size: A cannot be set up.
No restrictions.
Document size: E cannot be selected.
Media size: E cannot be set up.
Media size: A cannot be set up.
No restrictions.
Document size: A0 cannot be selected.
Media size: A0 cannot be set up.
Media size: A4 cannot be set up.