Size/Media Mapping - Xerox 6030 User Manual

Size/Media Mapping

Standard size images and user-defined images can be enlarged and reduced to fit
standard and user-defined output sizes. This is known as "Size Mapping".
It is also possible to specify which roll media is to be used based on the output size. This
function is known as "Media Mapping".
The function that automatically determines the output media size that best matches the
size of the output image is known as "Auto Mapping".
Size Mapping
Input image size
• These parameters are only valid when [AUTO], [OTHER], [MIX], or [MIX2] has
been specified for the [Paper Size] on [Output Option].
• Images will not be enlarged or reduced if [Auto Scale] has been set to [NO]. Refer to
the section on [Transform] for details on the [Auto Scale] function.
Enlarged
A2
Reduced
A1
A3
Output image size