Xerox 6030 User Manual page 56

3
While pulling on the lever located in the end
of the roll paper shaft, remove the paper
core in the direction of the arrow.
Pulling the lever releases the lock and
allows the roll to be removed from the
shaft.
There is an area at the front of the tray on which
the roll paper can be placed.
4
While pulling the lever located in the end of
the roll paper shaft, align the roll paper with
the paper size marks on the shaft and set
the roll in place.
5
Align the roll paper following the directions
displayed inside the media tray and load the
roll on the shaft guide.
Cut the lead edge of the media before
setting it in place if it is damaged. Refer
to "1.14 Cutting Roll Media" for details
on how to do this.