Xerox 6030 User Manual page 222

VPI (optional)
The following VPI communication parameters must be set up.
REPORT
OFFLINE
EOP Timeout
Job Separation
Menu Item
Determines if the host will be notified offline of the media
running out.
The default setting is [NO].
[ YES ]
[ NO ]
Determines if the EOP Timeout will be enabled [TIMEOUT] or
disabled [NO_TIMEOUT]. If set to [TIMEOUT], a Timeout
Value must be entered. The timeout value is entered within a
range of 1 to 255* seconds.
The default setting is [10 sec].
Sets the job separation. The default setting is [NO].
[ YES ]
[ NO ]
*If a value higher than [255] is entered for the timeout value, [255] will be set as the
value.
Description
Issues offline notification.
Does not issue offline notification.
Starts conversion processing once the command that
recognizes the end of the data is received, even if
this occurs midway through the file.
Performs the spooling process on the hard disk until
a timeout is issued.