Scan Speed - Xerox 6030 User Manual

Scan Speed

This setting determines whether or not the low document scanning speed will be enabled
when the <Low Speed Scanning> key on the control panel is pressed. The scanning
speed is reduced by fifty percent if this parameter is set to [On]. The default value when
shipped from the factory is [Off].
Procedure
1
Select [Scan Speed...] on the
[Custom Presets – System Presets]
screen.
2
Select [On] to enable low speed
scanning. Select [Off] to disable
low speed scanning.
3
Press the [Done] button.
The specified values will be saved and
the screen will return to the [Custom
Presets – System Presets] screen.
Custom Presets – System Presets
Time & Date... Timer...
How to start
Scan Speed...
scanning...
Other System
Presets...
Low Speed Scanning Cancel
Off
On
Done
Auto Clear/
Backlight Off.
Attention
Tone...
Done