Connecting With Near Field Communication (Nfc) - Xerox AltaLink B80 Series User Manual

6. Select Connect.
7. Once the connection is made, a pop-up message appears on the printer.
Touch OK on the printer touch screen.
8.
The job prints at the printer.

Connecting with Near Field Communication (NFC)

NFC Overview
Near field communication (NFC) is a technology that enables devices to communicate when
they are in close proximity. NFC allows you to add a printer to your Android mobile device
easily. After you add the printer, there is no need to use NFC on that printer. You can use
NFC to obtain the network interface to establish a TCP/IP connection between your device
and the printer.
Devices can communicate using NFC when they are within the following ranges:

Device with case: 17--- - 20 mm

Device without case: 20--- - 25 mm
Note: The actual range can vary depending on device manufacturer. For information about the required
settings for individual mobile devices, refer the documentation supplied by the manufacturer of your
mobile device.
For details about configuring NFC on your printer, refer to the System Administrator Guide at
www.xerox.com/office/ALB80XXdocs
Using NFC on your Mobile Device
The NFC feature requires the Xerox Print Service app to be installed on the mobile device.
Your mobile device must use the same Wi-Fi network environment as the printer to be able to find the
printer. The printer does not need to be wireless.
Note: This feature supports Android 4.4 or greater.
Installing the Xerox Print Service Plugin
1. On your mobile device, go to the Google Play Store and search for Xerox Print Service Plugin.
Install the Xerox Print Service Plugin app.
2.
3. Go to Settings and touch Printing.
4. Go to the notification pull-down bar and touch Xerox Print Service.
5. To enable Xerox Print Service, touch On.
6. Exit Settings.
.
B80XX Series Multifunction Printer
User Guide
Getting Started
47