Printing Methods - Xerox 6030 User Manual

Printing Methods

Documents may be submitted from a client to the 6030/6050 Wide Format
Printer using any of the following.
•
Ethernet (Direct) Printing
This capability is for UNIX systems. Printing takes place over TCP/IP networks
using the ftp and lpr commands.
•
Wide Format Windows Driver
The Microsoft
documents from various Windows applications.
•
BT-PlotAssistant (Ver. 3.4.0 or later)(Optional)
BT-PlotAssistant is printer support software that runs on Windows operating
systems. Using BT-PlotAssistant's simple user interface, the user can submit
documents to the 6030/6050 Wide Format printer.
•
PostScript/PDF Driver (PS/PDF)(Optional)
The PostScript/PDF driver provides enhanced printing performance and enables
users to print PDF documents. The customer who purchases the PS/PDF driver
is provided with a Feature Key which is required for driver installation.
Refer to "Chapter 11 Ethernet Print Service (for UNIX)" for details on available
functions.
® ®
Windows print drivers (32 bit only) enable users to print
Serial output is not supported by the Wide Format Windows Driver.
Refer to the Xerox 6030/6050/6204 Wide Format Windows Driver User Guide for
details on available functions.
Refer to the Xerox 6030/6050/6204 Wide Format BT Plot Assistant User Guide for
details on available functions.
Refer to the Xerox 6030/6050/6204 Wide Format PostScript Driver User Guide for
details on available functions.