Xerox 6030 User Manual page 79

Activate the auto mode to display the media mapping table on the touch screen. The
media size that will be selected for each scanned document size is set up in this table.
In the example below, an A2 document is enlarged to the A1 size (141.4%) and
copied on bond A1 paper (the settings are the shaded values). A [No Paper] error
will occur if A1 paper is not loaded in the tray.
Copy setup screen
Document Size
A0 A1
M e d i a
A0 A0
Size
A1 A1
A2 A2
A3 A3
A4 A4
Custom preset function
Media size
A0 A1 A2
Not Not Not
Selected Selected Selected
Bond Bond Bond
Film Film Film
Vellum Vellum Vellum
A2 A3 A4
A0 A0 A0
A1 A1 A1
A2 A2 A2
A3 A3 A3
A4 A4 A4
A3 A4
Not Not
Selected Selected
Bond Bond
Film Film
Vellum Vellum
• Refer to section "3.2 Making Copies in the Auto Mode" for more details on the
auto mode.
• Refer to the "Media Type for Auto Mode" section in "5.3 Setting up the Copy
Features" for more details on the custom presets.
A2
Enlarged
Document
A1
Copy