Variable Length Preset - Xerox 6030 User Manual

Variable Length Preset

Sets up the default values for the [Variable Length] displayed on the setup screen when
the media cut mode is specified. The paper sizes can be set up within a range of 210 to
15,000 mm for each media size.
Procedure
1
Select [Variable Length Preset] on
the [Custom Presets – Copy
Features] screen.
2
Select the item to be set up with
the use of the [ ] and [
buttons, and then press the [Open]
button.
3
Set the required length with the
use of the [ ] and [
and then press the [Done] button.
The entered value will be reflected back
on the Variable Length Preset screen.
4
Press the [Done] button.
The specified values will be saved and
the screen will return to the [Custom
Presets – Copy Features] screen.
The maximum length that can be printed will differ based on the width of the
selected media and whether or not the optional Print Length Extension
Memory (512 MB) is installed.
]
] buttons,
Press the [+100] and [–100]
buttons to increase or decrease
the value in increments of 100.
Custom Presets – Copy Features
Switch Feature Default Copy
Buttons... Feature...
Variable
R/E Preset...
Length Preset.
Output Order Program Sort
Preset... Preset...
Variable Length Presets
Items Setting
1. Variable Length (E) 1188 mm
2. Variable Length (D) 841 mm
3. Variable Length (C) 594 mm
4. Variable Length (B) 420 mm
5. Variable Length (A) 297 mm
Previ-
1/1
Next
ous
Variable Length (E) Cancel
(210 15000)
1188 mm
+100
-100
Done
Media Type
fot Auto mode.
Auto Image
Rotate Preset.
Other Copy
Presets...
Done
Open
Done