Other System Presets - Xerox 6030 User Manual

Other System Presets

To access the Other System Presets, select the [Other System Presets] button on the
[Custom Presets - System Presets] screen. These selections can be used to set up all of
the remaining system presets (see the table below).
Code
Other System Preset (description)
Number
0 Determines whether or not to switch from the
tray to the roll automatically.
(N/A for 6030/6050)
1 Determines whether or not to switch from the
roll to the tray automatically.
2 Sets up the priority sequence for roll 1.
3 Sets up the priority sequence for roll 2.
4 Sets up the priority sequence for roll 3.
5 Sets up the priority sequence for roll 4.
6 Reserved
7 Reserved
8 Sets up the priority sequence for manual
feeding.
9 Sets up the minimum length of the
guaranteed cut when synchronized cutting is
selected.
10 Determines whether copies will print while
scanning is being performed when
synchronized cutting has been selected.
11 Sets up the roll or tray to be used when
printing stamp lists and the contents of the
job memory.
12 Sets up the media cut mode to be used
when printing stamp lists and the contents of
the job memory.
Change
No: 0
Yes: 1
No: 0
Yes: 1
0 to 4
0 to 4
0 to 4
0 to 4
-
-
0 to 6
0 to 15 m
(Subsequent documents will
not be scanned until the
previous copy has printed
when this parameter is set to
[0] or to a value that exceeds
the capacity of the memory.)
No: 0 (copies will print while
the document is being
scanned.)
Yes: 1 (copies will print after
scanning is completed.)
Roll 1: 0 Roll 2: 1
Roll 3: 2 Roll 4: 3
Standard Portrait: 0
Standard Landscape: 1
Variable Length: 2
Synchronized: 3
Default
No: 0
No: 0
1
2
3
4
-
-
0
7 m
Yes: 1
Roll 1: 0
Standard
Portrait: 0