Xerox 6030 User Manual page 92

When the [Change Setup] button is pressed
The [Sample Copy Change Setup] screen will display.
Copy setting can be changed.
Sample Copy Change Setup
Document
Normal R/E...
Image Type...
R/E by L&W... Auto-Mode...
Background
Media Cut
Mode... Suppression...
Threshold
Media Supply...
Level...
Set up each of the required functions.
Refer to "3.1 Overview" in this manual for more details on these functions.
3
Insert the document in the scanner face down, and with the edge aligned with
the document insertion guide. The document will scan.
4
Press the <Start> key. A sample copy which includes the selected settings will
print.
5
1
Repeat steps through
The sample copy mode is canceled every time a sample copy is printed. To
print additional sample copies, press the <Sample Copy> key again and make
the necessary setting adjustments.
6
Once the desired copy quality is achieved, press the <Copy From Memory>
key to print the document again. The changed settings will be applied to the
entire image.
Refer to "2.4 Copying from Memory" in this manual for more details on how to
copy from the memory.
Done
Mirror Image
Contrast
Reversal
Sharpness...
Image
Density...
4
to print additional sample copies.