Ps/Pdf Option - Xerox 6030 User Manual

PS/PDF Option

The available selections set up the default media size, roll, and DMS for PS/PDF data.
Settings
The settings for this function are as follows.
Menu Item
Default Media
Size
Default Media
Source
Default DMS
Plot Area
If media size information is not included in the print data, and no
media is loaded in any trays, the page size of the data will be the
selected media size.
The default setting is [ISO_A0] .
If media size information is not included in the print data, the page
size of the data will be the selected media size.
The default setting is [ROLL 1] .
If a DMS is not specified in the print data, the page size of the data
will be the media size specified on the logical printer. The
available settings are [ENABLE] and [DISABLE] .
The default setting is [DISABLE] .
This selection sets up the printable area.
The default setting is [Normal] .
[Normal] Adds 4 mm margins to the top, bottom, left, and right
sides of the media. Print data is placed inside the margins.
[Extend] No margins are added. Images will be printed to the edge
of the page.
Description