Labrie AUTOMIZER Helping Hand Operator's Manual page 99

4
Part # 200277 (rev.00.10.2024)
Operating the
A
UTOMIZER
The different methods, procedures and necessary
actions to operate the A
this section.
Warning!
Always read and understand the
Operator's Manual before operating the
unit.
Before operating the A
be completely familiar with all safety procedures, and
the location, operation and functions of all controls
and indicators related to the operation of the unit.
Also, you must complete the daily inspection before
starting the vehicle. It is your responsibility to report
any malfunctions or concerns to your supervisor and
maintenance personnel.
Consult with your supervisor for specific rules of
driving the A
UTOMIZER
Obey all speed restrictions and regulations.
Daily Inspection
Approaching the Vehicle
As you approach the vehicle, look for any object under
or against the vehicle and check the surroundings for
people, other vehicles, as well as ground and overhead
obstructions. Ensure that the truck is parked at the
most convenient place where you will have all the
clearance required to perform a complete start-of-the-
day inspection. During the daily inspection, look for
any structural damage. Inspect tires and check the
hydraulic tank for air leaks.
are presented in
UTOMIZER
, the operator must
UTOMIZER
.