Labrie AUTOMIZER Helping Hand Operator's Manual page 65

Force
The Force page is accessible from the Output Status page. Just press the corresponding button to
access the Force page.
But before the Force page is displayed, a warning message appears on the monitor screen (see Figure
3-11).
Figure 3-11 Warning message
This message stays on for 15 seconds. Then an "OK" prompt appears on the lower right-end corner
of the screen.
It is very important to read this message entirely before accessing the next page.
I :
MPORTANT
Figure 3-12 Warning message w/ "OK" prompt
Press "OK" to go to the Force page or "Esc" to return to the preceding page.
After pressing "OK", the Force page appears on the screen.
Part # 200277 (rev.00.10.2024)
Controls and Indicators 53