Labrie AUTOMIZER Helping Hand Operator's Manual page 106

94 Operating the A
UTOMIZER
Setting the Floor Riser
: This section applies only to cabs modified by Labrie Environmental Group. If your cab has not
N
OTE
been modified by Labrie Environmental Group, please refer to your cab manufacturer's
recommendations.
In an A
UTOMIZER
adjustable floor riser. This riser makes your stand-up driving more efficient by giving you a better field
of view, a more comfortable driving position, and a safer non-slippery surface to stand on. Also, its
grid pattern allows drainage of any type of mud or snow that can be stuck under your boots.
Labrie Environmental Group recommends the use of this aluminum platform in its horizontal
position at all times when driving from the right-hand side.
To set the floor riser:
1. With the floor riser in vertical position, release the latch and pull down the floor riser to its
horizontal position (see Figure 4-4).
Figure 4-4 Floor riser in vertical position (left), in horizontal position (right)
Part # 200277 (rev.00.10.2024)
vehicle, the right-hand side driving position can be equipped with a height-
Latch