Labrie AUTOMIZER Helping Hand Operator's Manual page 30

18 Safety
Figure 2-3 Safety prop handle
6.
With the B
the body until it rests on the safety prop.
7. Lock out and tag out the vehicle (see Locking Out and Tagging Out the Vehicle on page 33).
You can now work safely underneath the body.
Putting the Body Safety Prop Back in Place
To put the body safety prop back in its home position:
1. Make sure that there is enough clearance above the body to raise it safely.
2. Start the engine.
3. Turn ON the pump (see P
4. With the B
until the safety prop can move freely.
5.
Put the safety prop back in its place.
6.
With the B
the body until it rests on the chassis.
Part # 200277 (rev.00.10.2024)
D switch on the control panel (see B
ODY OWN
S
UMP WITCH
U switch on the control panel (see B
ODY P
D switch on the control panel (see B
ODY OWN
D
ODY OWN
on page 74).
U S
ODY P WITCH
D
ODY OWN
S on page 75), lower
WITCH
on page 75), raise the body
S on page 75), lower
WITCH