JEOL JSM-IT200 Instructions Manual page 314

7.8 PERFORMING THE INSTANT ANALYSIS
The spectrum analysis of any one point (analysis point) on a specimen is performed only while the operator
is touching the screen. The measurement starts immediately upon Clickping, therefore the time taken for
identifying the measured area can be shortened.
The spectra acquired from the instant analysis cannot be saved. Perform the EDS measurement to save a
spectrum.
1.
Click the Instant icon.
2.
Click the position that needs to be analyzed.
Analysis is in progress only while the operator is touching the target position.
To analyze a different position, touch the new position.
No.ISMIT200-1E
7-11