Although this instrument is protected with safety device which
prevents the occurrence of accident that could result in an injury,
harm, and damage to the users or instrument itself, the safety
feature may not work properly if you use the instrument for the
purpose of use not intended or in an improper usage. For the
proper use of the instrument, please be sure to read all of the
instructions, descriptions, notices, and precautions contained in this
manual carefully to understand them fully prior to the operation or
maintenance. This section, "Safety Precautions", contains important
information related to safety for using of the instrument.
The safety indications and their meanings are as follows:
DANGER
An imminently hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING
A potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
A potentially hazardous situation which, if not avoided,
may result in minor or moderate injury, or a situation that
could result in serious damage to facilities or acquired
Use the instrument properly within the scope of the purpose and usage described in its brochures
and manuals.
Never open/remove protective parts (exterior panels) and parts that can't be opened/removed
without use of tool (including key), or disconnect/ connect the cables/connectors that are not
described in this manual.
Never attempt to do any works of disassembling/assembling the instrument other than those
described in this manual.
Never make modifications that include installing substitute parts and disabling safety devices or
other safety features.
Never disconnect the grounding wire or move it from the prescribed position. Failure to follow this
instruction could result in electric shock.
The AC power cord provided with this system is supplied for the particular device so that never
use it for any other equipment.
To avoid falling, do not climb onto the operation table and console during daily operation or during
maintenance or inspection.
When you dispose of the instrument or liquid or other waste, follow all applicable laws and
regulations, and dispose of it in a proper manner without polluting the environment.
Be sure to read the "Safety Precautions" section of the manuals for the accessories attached to or
built into the instrument.
If anything is unclear, please contact your JEOL service office.
WARNING for Installation
Do not attempt to install the instruments by yourself.
Installation work requires professional expertise and JEOL is responsible for the installation of the
instruments and related attachments purchased from JEOL.
Consult your JEOL service office.
SAFETY
PRECAUTIONS
Labels bearing the following symbols are attached
to dangerous locations on the instrument. Do not
touch any of these locations with your hands or
anything else.
Beware of
electric shock
Beware of
super low temp
Beware of
Beware of
getting caught
biohazard
Examples of symbols
Beware of
laser
Beware of
heat
Do not
disassemble
Need help?
Do you have a question about the JSM-IT200 and is the answer not in the manual?