JEOL JSM-IT200 Instructions Manual page 174

＜The moving range of the 32mm diameter specimen holder＞
For motor drive stage
◆CAUTION◆
• Z value of the table is Z-axis value of the GUI (reading value of Z sensor).
When you entered "specimen height value, it becomes a value in which the value of "Specimen height" is
subtracted from Z value of Stage window.
• The following movement range is not considering a sample size of height direction.
The following movement range is based on a sample is not protruded above the holder surface.
If a sample protrudes above the holder surface, the following movement range does not secure, please
use the "Specimen height".
• When the motor drive stage
The following movement range becomes a value in which the value of T axis coordinates that is moved
by manual operation is inputted to the T value of the stage window. If you do not input the T axis
coordinates to the T value, the T axis becomes an origin (0 degree). Then, the following movement range
does not secure.
Ex.）32mm dia. holder, Z=30mm：When the T axis is slanted to 65 degree by the manual operation
When you input 65 degree to the T value in the stage window (T＝65°)
‐57.00≦X≦+15.00、‐10.00≦Y≦+25.00
When you do not input 65 degree to the T value in the stage window (T＝0°)
‐57.00≦X≦+15.00、‐15.00≦Y≦+25.00
Z
(mm)
8 10
T (°)
○ ○
-10
○ ○
0
○ ○
10
× ×
20
× ×
30
× ×
40
× ×
50
× ×
60
× ×
70
× ×
80
× ×
90
○： Movable with whole range (X= -57mm～23mm and Y= -15mm～25mm)
×： Not movable regardless of position of X and Y axes
Origin position: (X, Y) = (0, 0)
No.ISMIT200-1E
※
is slanted, be sure to input the coordinates to the T value.
15 20 25
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
X=-57～18
× ○
Y=-15～25
× × ○
X=-57～12
× ×
Y=-1～25
× × ×
× × ×
× × ×
※ Target: MP-01260MS, MP-01270MSR, MP-01280MSZ
30 35
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
X=-57～12
○
Y=-4～25
X=-57～12 X=-57～12
×
Y=-4～25 Y=-10～25
× ×
40 45 48
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
X=-57～12
○
Y=-15～25
X=-57～12
× ×
Y=-2～19
5-45