Table 42-14 Show Ip Ospf External - Display Description - SMC Networks TigerStack II SMC8926EM Management Manual

The following shows output when using the external keyword.
Console#show ip ospf database external
OSPF Router with id(192.168.5.1) (Autonomous system 5)
Displaying AS External Link States
LS age: 433
Options: (No TOS-capability)
LS Type: AS External Link
Link State ID: 10.1.1.253 (External Network Number)
Advertising Router: 10.1.2.254
LS Sequence Number: 80000002
LS Checksum: 0x51E2
Length: 32
Network Mask: 255.255.0.0
Metric Type: 2 (Larger than any link state path)
Metric: 1
Forward Address: 0.0.0.0
External Route Tag: 0
Console#

Table 42-14 show ip ospf external - display description

Field
OSPF Router id
LS age
Options
LS Type
Link State ID
Advertising Router
LS Sequence Number
LS Checksum
Length
Network Mask
Metric Type
Metrics
Forward Address
External Route Tag
Description
Router ID
Age of LSA (in seconds)
Optional capabilities associated with the LSA
AS External Links - LSA describes routes to destinations outside the AS (including
default external routes for the AS)
IP network number (External Network Number)
Advertising router ID
Sequence number of LSA (used to detect older duplicate LSAs)
Checksum of the complete contents of the LSA
The length of the LSA in bytes
Address mask for the network
Type 1 or Type 2 external metric (see "redistribute" on page 42-25)
Cost of the link
Forwarding address for data to be passed to the advertised destination
(If set to 0.0.0.0, data is forwarded to the originator of the advertisement)
32-bit field attached to each external route
(Not used by OSPF; may be used to communicate other information between
boundary routers as defined by specific applications)
Open Shortest Path First (OSPF)
42
42-45