SMC Networks TigerStack II SMC8926EM Management Manual page 211

CLI – This command displays global STA settings, followed by settings for each port.
Console#show spanning-tree
Spanning-tree information
---------------------------------------------------------------
Spanning Tree Mode:
Spanning Tree Enabled/Disabled:
Instance:
VLANs Configuration:
Priority:
Bridge Hello Time (sec.):
Bridge Max Age (sec.):
Bridge Forward Delay (sec.):
Root Hello Time (sec.):
Root Max Age (sec.):
Root Forward Delay (sec.):
Max Hops:
Remaining Hops:
Designated Root:
Current Root Port:
Current Root Cost:
Number of Topology Changes:
Last Topology Change Time (sec.): 2869
Transmission Limit:
Path Cost Method:
---------------------------------------------------------------
Eth 1/ 1 information
---------------------------------------------------------------
Admin Status:
Role:
State:
External Admin Path Cost: 0
Internal Admin Path Cost: 0
External Oper Path Cost:
Internal Oper Path Cost:
Priority:
Designated Cost:
Designated Port:
Designated Root:
Designated Bridge:
Fast Forwarding:
Forward Transitions:
Admin Edge Port:
Oper Edge Port:
Admin Link Type:
Oper Link Type:
Spanning Tree Status:
.
.
.
Note:
The current root port and current root cost display as zero when this device is not
connected to the network.
RSTP
Enabled
0
1-4093
32768
2
20
15
2
20
15
20
20
32768.0000E3111010
0
0
2
3
Long
Enabled
root
forwarding
100000
100000
128
0
128.1
32768.0000E3111010
32768.0000E3111010
Disabled
1
Disabled
Disabled
auto
Point-to-point
Enabled
Displaying Global Settings
10
33-18
10-5